For a while now, I’ve had the urge of SBRing a Mauser, and cutting the barrel to 7″, turning it into an evil spirits defying flame-thrower/car alarm setter-offer.
I started off with a shot out M38 Turkish Mauser, I had rescued from an ATI plastic sniper stock, and a sporterized 98K stock I found on eBay.
After that, the project pretty much sat idle in my safe, awaiting time and money to continue.
And then I ran across Rhineland Arms, who sells a kit to convert a 98 Mauser into .45ACP. Fed by a 1911 magazine seated in an adapter, the gun features a 16.25″ barrel, and an extended ejector. And of course with my AAC Ti-Rant 45 suppressor on the way, I couldn’t think of a better project. No action noise and a short and handy subsonic pistol caliber rifle. a German/Turkish based abdomination of a DeLisle? William De Lisle will roll over in his grave if he finds out…
I decided to remove the shot out barrel from the receiver. I soaked the threads overnight with Mouse Milk, and heated a section of the barrel to red hot, about 6″ from the muzzle. Once the barrel was nice and hot, I bent the barrel 90 degrees, to ease the removal process. After carefully rigging the received in a vice, I added a cheater bar to the now 90 angled barrel, and broke the barrel free, easier as I had expected.
Then, with the barrel removed, I cut the barrel down to 16.5″ so I could make a mock-up of the rifle with a 16.25 barrel.
I still have to come up with a solution for a sight. I’m not sure if I will be installing original Mauser sights, or if I am going to run a small red-dot. The benefit of a red dot is that it will clear a suppressor at the muzzle.