My friend Todd was kind enough to let me take some pictures of his Remington Rand. The gun has been in his family for quite some time, and unfortunately for me – he doesn’t want to part with it…
Around the same time that the US was choosing a new semi-auto pistol, the Kingdom of Norway was also looking to standardize on a new pistol. They actually ended up selecting Colt’s 1903 Model. However, before they could go into full production of the 1903, the US selected the 1911, which caused Norway to reconsider.
Norway ended up selecting the 1911 with a minor change in the design of the slide stop lever. This was designated as the Norwegian Model of 1914, also known as the Kongsberg Colt (as it was made under license in the Kongsberg factory in Norway).
At the start of WW2, Germany invaded and occupied Norway. Production of the Kongsberg Colt continued while under Nazi occupation. It was designated as the Pistole 657(n). Approximately 8000 were made during the period 1940-1945.
However, only in the last year of production did the Germans add the Waffenamt stamp indicating it was a german weapon. This is one of approximately 920 pistols to receive the German Waffenamt, marking it as a Nazi 1911. Notice the Norwegian modified slide stop lever. Makes it easier to operate with one hand.
As posted by member “Beetle” on Calguns.net, who owns this beautiful and very rare peace of history.
I was able to take the gun out today, and shoot it without other shooters around. She functioned flawlessly, the cheap gunshow magazine marked “COLT 45” works even better than the Chip McCormick one. I had ZERO feeding issues today.
I soldered on a rear sight sleeve, and a front sight. The finish I ended up applying was Brownell’s Park-grey. I had two out-of the box failures with the pricey gun-kote they sell. Truly a crappy product.
Next week I hope to properly sight it in.
Finally got the barrel threaded, and was able to test it. AAC Ti-Rant 45 is mounted!
The day before Thanksgiving, my Ti-Rant 45 form 4 showed up at my dealer, and re-sparked my 45ACP Mauser project.
During the holiday, I carefully determined that I had a large-ring receiver, and ordered the Rhineland kit. Shipping was prompt, and 3 days later it arrived.
After un-boxing the kit, which was packaged extremely well by Rhineland, I took to the laboratory to screw the new in-the-white barrel into my receiver.
Alas. The new barrel was too big. I quickly snapped some pictures, and right before my wife served dinner, mailed them off to Rhineland, asking him what the deal was.
Shorty after he responded that I did indeed have a hybrid bastard-child of a gun, a large ring receiver with a small ring thread. Just my luck. “No problem,” he said, “I’ll send you a small ring one, send me the large ring one back when you can”. I promptly sent my barrel back, and in the mean time, Rhineland had sent me replacement already, along with the back-ordered ejector. No charge on the shipping.
The replacement barrel fit like a glove. I screwed in the barrel, inserted a 45ACP No GO gauge in the chamber with the bolt, and determined my headspace, alternating between GO and NO GO gauges, until I found the right spot.
Tighten the lock ring with some Blue Loc-tite on the treads, confirm headspace, and step 1 is done.
After that, I installed the magazine adapter and extended ejector, and after a bit of tweaking and filing, I got ‘er cycling and feeding smoothly.
The initial range trip was successful today, although the Kimber magazine I had modified to function properly at home, proved less reliable than a unmolested Chip McCormick magazine. Unlike some previous builder stated in their Youtube build video, I don’t have to “ram” the bolt home to get a positive feed, just some good momentum is enough.
Next up for this project:
- Remove the barrel and have it threaded .578″x28 for use with a suppressor;
- Reinstall barrel, and refinish the received and barrel. I’m thinking a simple Brownells spray-on finish.
- Come up with a solution for sights of some kind. A way to low-mount a Doctor/RPD-II would be ideal.
The gun’s serial number tells us that it was built by Colt in 1918, part of a batch made for the US Navy.
It appears to be in original condition, and as one can expect from a firearm this old, the finish is quite worn. The barrel has a surprising amount of rifling left.
If this gun could tell its story….
I got to handle and photograph a DeLisle Silent Carbine today. Unfortunately not the original, but the next best thing: A Valkyrie Arms replica.
A brief history of the DeLisle Silent Carbine.
In 1943, Mr William Godfrey DeLisle submitted his .45 ACP DeLisle Carbine prototype to Sir Malcolm Campbell of the Combined Operations HQ for unofficial testing. The testing was done at the Atlantic Seashore, and the gun was noted to have no muzzleflash, even at low light and was “inaudible” at 50 yards. Grouping of 2″ at 50 yards was reported.
DeLisle was ordered to produce an additional small number of carbines, and with the assistance of a few machinists, out of rejected SMLE rifles and Thompson Submachinegun barrels, 17 additional carbines were produced.
These 17 guns were directly put into the hands of British Commando units.
On January 12th of 1944, Mr DeLisle was informed that the “trials to date had been promising”, and by August of 1944, Sterling Engineering Company started production of the carbine, with few exterior modifications. About 130 units were made by Sterling, of which 106 being delivered to Combined Operations.
In the meantime, the 17 prototypes had been used extensively in France by British Commandos, on hit and run missions, all while the ordnance board was still reviewing the design and testing.
The gun pictured is a Valkyrie Arms replica. Valkyrie built the gun true to the original blue-prints, including the design of the suppressor.
The Valkryie Arms replica is a beautifully built rifle, and not often encountered. Definitely a rare and desirable piece, even for a replica!
I hope to be able to shoot the rifle at my next visit.
For a while now, I’ve had the urge of SBRing a Mauser, and cutting the barrel to 7″, turning it into an evil spirits defying flame-thrower/car alarm setter-offer.
I started off with a shot out M38 Turkish Mauser, I had rescued from an ATI plastic sniper stock, and a sporterized 98K stock I found on eBay.
After that, the project pretty much sat idle in my safe, awaiting time and money to continue.
And then I ran across Rhineland Arms, who sells a kit to convert a 98 Mauser into .45ACP. Fed by a 1911 magazine seated in an adapter, the gun features a 16.25″ barrel, and an extended ejector. And of course with my AAC Ti-Rant 45 suppressor on the way, I couldn’t think of a better project. No action noise and a short and handy subsonic pistol caliber rifle. a German/Turkish based abdomination of a DeLisle? William De Lisle will roll over in his grave if he finds out…
I decided to remove the shot out barrel from the receiver. I soaked the threads overnight with Mouse Milk, and heated a section of the barrel to red hot, about 6″ from the muzzle. Once the barrel was nice and hot, I bent the barrel 90 degrees, to ease the removal process. After carefully rigging the received in a vice, I added a cheater bar to the now 90 angled barrel, and broke the barrel free, easier as I had expected.
Then, with the barrel removed, I cut the barrel down to 16.5″ so I could make a mock-up of the rifle with a 16.25 barrel.
I still have to come up with a solution for a sight. I’m not sure if I will be installing original Mauser sights, or if I am going to run a small red-dot. The benefit of a red dot is that it will clear a suppressor at the muzzle.
I finally received my Storm Lake threaded barrel for my Full Rail Operator, and after some minor fitting, we went out and mounted my friend’s YHM Cobra to it.
I couldn’t be happier with the Storm Lake barrel, it is a very nice barrel, fit and finish were great. Now the wait for my Form 4 to clear for my AAC Ti-Rant 45…